Block Walls Allowing Heat Loss in Evansville Crawlspace
The homeowners were constantly fighting cold floors and once their son started crawling, they were even more aware of the problem. In order to create a warmer environment, they decided to install a Cleanspace vapor barrier and SilverGlo Insulation.
Overview of SilverGlo Panel
In this shot, you can see a panel of SilverGlo. SilverGlo has an R-11 rating and a silver coating that will reflect heat back into the crawlspace, so the entire system is more energy efficient.
Close up of Adhesive to Secure SilverGlo Panels to Wall
In this shot, you can see the adhesive that has been applied to the block crawlspace walls in order to afix the SilverGlo panels to the crawlspace walls.
Overview of Adhesive Application in Evansville Crawlspace
You can see here that the SilverGlo panel is being lifted into position to adhere the wall. After the panel is secured to the wall, it will be riveted to the wall and then Cleanspace will be applied over that to create a sealed crawlspace system.
SilverGlo Panels in Place in Evansville Crawlspace
Here, the panels are in place and ready for riveting.
SilverGlo Panels Around Perimeter of Crawlspace
Here's another shot of the SilverGlo panels covering the crawlspace walls. The SilverGlo panels will be placed along all the walls, then pieces of SilverGlo will be installed inbetween the rim joists as well.
Close Up of Rivet Securing SilverGlo in Evansville Crawlspace
In this picture, you can see the rivet securing the SilverGlo Insulation to the crawlspace wall. Now that the rivets have been set, those spots will be covered with reflective tape so that the panels maintain a completely heat reflective surface.
Close Up of Reflective Tape Covering Rivets in Evansville
Here, the rivets and seams have been covered in reflective tape to create a continuous and reflective surface.
Overview of SilverGlo Insulation in Progress
In this shot, you can see the plumbing that will experience increased energy efficiency from the Cleanspace and SilverGlo installation. Below that, you can see the pink color of the Cleanspace "Pinkie Roll" for lining the walls.
Pinkie Roll Being Prepped to Cover SilverGlo in Evansville Crawlspace
In this shot, you can see the pinkie roll being measured out and prepared to cover the walls and the SilverGlo. The Cleanspace liner will keep out groundwater, critters, mold, and more.
CleanSpace Liner Curving up Walls to Keep out Groundwater
You can see how the Cleanspace is being wrapped up the walls in order to keep the seams up higher than groundwater could penetrate.
CleanSpace Liner Curving up Walls to Keep out Groundwater
You can see how the Cleanspace is being wrapped up the walls in order to keep the seams up higher than groundwater could penetrate.
Overview of Cleanspace Secured to Walls
Here, you can see how the Cleanspace has been secured to the SilverGlo throughout the crawlspace. The next step will be for the Pinkie Roll to cover the walls completely.
Finishing CleanSpace Installation
The tape roll that you see in this shot is no ordinary tape. It's a water-resistant, super sticky tape that is used exclusively to make sure that CleanSpace stays exactly where it should.
Pinkie Roll Installed Over SilverGlo in Evansville Crawlspace
In this shot, you can see the Pinkie Roll installed over the walls to finished isolating the crawlspace from the outside air, groundwater, and dirt. This area, once the HVAC system has filtered through, will be a conditioned space.
Brighter Crawlspace with CleanSpace
In this shot, you can really see the CleanSpace difference! The light reflects off the white Cleanspace and creates a brighter, safer location for those Christmas decorations, or other things that need storing.